SOFTWARE

LATEST DRIVERS

TOP DRIVERS

Changes:

- SCGCQ01719221 - Disk Management is not sync, when user make JBOD drives on/off in DDA environment.
- SCGCQ01867931 - MR7.8-9480-8i8E: Hit BSOD After creating Raid 5 With 21 drives
- SCGCQ01903612 - Drop in SATA Max performance
- SCGCQ01934785 - Fix Code analysis Warnings for MR Windows Driver
- SCGCQ01829658 - MR 7.8: Code Review changes.
- SCGCQ01884876 - MR 7.8 Handle QDepth setting when Targetprop DCMD failed.
- SCGCQ01906986 - MR_7.8: On single CPU system, JBOD's are not reflected in Disk Management in a particular scenario..
- SCGCQ01834610 - Enable/Disable of RTTrace Logging via StorCLI .
- SCGCQ01853693 - MR7.8: Controller not accessible by OS after OCR
- SCGCQ01856931 - Forced crashdump did not produce the memory dump file when Windows 2016 is on VD
- SCGCQ01881268 - MR 7.8: Avoid DPC Timeout BSOD while waking up from S3 for Windows Driver.
- SCGCQ01903381 - Add RtTrace event for Device IO pause and Resume
- SCGCQ01765371 - MR7.7: OS hang during OCR w/ I/O running on VD and EPD.
- SCGCQ01871850 - Windows Driver allocates more QD than FW reported.
- SCGCQ01931277 - MR7.8: On Win10RS1 x86 - BSOD IRQ_NOT_LESS_THAN_EQUAL is observed during system wake-up from hibernation
- SCGCQ01916091 - Hitting KA while doing LD creation in loop
- SCGCQ01937281 - Making LDs offline to generate pinned_cache or do foreign import caused Windows BSOD
- SCGCQ01686815 - PA2-MR7.7-FW: Windows Disk Management tool does not detect the secured JBOD after moving it to ctrl0 from ctrl1
- SCGCQ01883334 - MR7.8-9460-16i:RAID Personality(9460-16i) & JBOD Personality(9A60-16i) Show Different Driver name in Win 10x32 bit
- SCGCQ01829844 - Implement MR Driver/FW Handshake to copy Rttrace File when copying Snapdump.
- SCGCQ01837729 - EPD behavior to handle IO greater than MDTS matches JBOD
- SCGCQ01719001 - New driver IO path implemented
- SCGCQ01824201 - TM through CLI has similar behavior to a case of genuine TM from Storport

This procedure installs the Intel RAID device driver on a new Windows 2012/8 system. Windows 2012/8 automatically adds the driver to the registry and copies the driver to the appropriate directory.
1. Start the Windows installation by booting from the Windows 2012/8/2008/7 DVD-ROM. The system BIOS must support booting from a DVD-ROM. BIOS settings might require changes to allow DVD-ROM booting. See your system documentation.
2. When the screen displays: "Where do you want to install Windows?", select 'Load Driver', then click Next.
3. The system prompts for a Load Driver dialogue to ask for the manufacturer-supplied hardware driver disk. Insert the driver diskette containing the Windows 2012/8/7/2008 device driver, and press <Enter>. NOTE: You may ask to supply the appropriate INF path if you want to load driver from a USB flash drive.
4. Select the Windows device driver from the menu by highlighting it, then click Next.
5. Remove the USB flash drive. Follow the Microsoft Windows installation procedure to continue the OS installation.

This procedure installs or updates the Intel RAID device driver on an existing Windows 7/2008 system.
1. Boot Windows.
2. Under Control Panel, select Administrative Tools -> Computer Management. Then Select Device Manger and identify the new add-in device. Double click the device, then select the Drier Page, click Update Driver to install the new driver.
3. Insert the driver diskette into the A: drive.
4. Click the 'Browse My computer for driver software' button.
5. Click the 'Browse' button to specify the driver disk location A:
6. Click the 'Next' button then system will search driver in the specified location and install the driver automatically.
7. Click the 'Close' button to complete the driver installation.
8. Repeat this process for all the controllers on your system.

About SATA / AHCI / RAID Controller Drivers:

When enabled by appropriate software, the SATA controller (RAID or AHCI) is properly recognized by the system and all of its features are made accessible.

In addition to that, the computer will have the ability to read all adapter characteristics, such as model and manufacturer, and will also be able to manage physical disk drives through the controller's interface.

If you wish to apply this package, all you have to do is to make sure that the current release is compatible with both your adapter model and your operating system, and then to get the downloadable software. Extract it if necessary, run the available setup, and follow the on-screen instructions for a complete installation.

When finished, remember to perform a system reboot to make sure that all changes take effect properly. Please remember that, even though other OSes might also be compatible, we do not recommend installing this software on platforms other than the specified ones.

That being said, click the download button, get the package and apply it on your computer. Moreover, constantly check with our website to stay up to date with latest releases.