register at Windows8Downloads.com Windows 8 Downloads RSS add Windows 8 Downloads to favorites Windows 8 Downloads bookmark

Nikon Z 7 Camera Firmware 1.02 Windows 8 driver download - Windows 8 Downloads

Windows 8 driver

Nikon Z 7 Camera Firmware 1.02



Nikon Z 7 Camera Firmware 1.02 - Details

File Size: 27.50 MB
OS: Windows 7 / 7 64 bit / 8.1 / 8.1 64 bit / 10 / 10 64 bit
Released: Nov 15, 2018
Downloads: Total: 13 | This Month: 13
Keywords: Nikon Z 7 Camera Firmware 1.02, download Nikon Z 7 Camera Firmware 1.02, Nikon Z 7 Camera Firmware 1.02 free download, Nikon Z 7 Firmware, Z 7 Camera Firmware, Nikon Z 7 4K UHD Camera Firmware, Z 7, Firmware, Nikon, Camera
Download Nikon Z 7 Camera Firmware 1.02

Nikon Z 7 Camera Firmware 1.02 driver for Windows 8 - Full description

Changes:

- Fixed an issue that caused the display to flicker if pictures were scrolled during playback zoom after the user had taken pictures using the viewfinder with Prioritize viewfinder selected for monitor mode and then removed his or her eye from the viewfinder before starting playback.
- Fixed an issue that allowed the camera to exceed the value chosen for ISO sensitivity settings > Maximum sensitivity in the MOVIE SHOOTING MENU if it was from ISO 200 to 20,000 and On was selected for MOVIE SHOOTING MENU > Electronic VR.
- Updated some help displays.
- Fixed an issue that caused Capture NX-D or ViewNX-i to crash when displaying NEF (RAW) pictures taken with the following options selected for HDR (high dynamic range) in the PHOTO SHOOTING MENU: HDR mode: On (series) or On (single photo) / Save individual images (NEF): On

Viewing the Camera Firmware Version:

- Turn the
 on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a
 on the computer hard disk and name it as desired.
- Download the file to the folder newly-created.
- Extract the file to a folder named “Z7Update”
- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.



Windows 8 Nikon Z 7 Camera Firmware 1.02 related drivers

Changes: - The camera would sometimes freeze when turned on under water. - The location data display for active mode showed seconds in base 10. - Improved the accuracy of location data in certain locations (specifically, those locations where location data are augmented by data from “Michibiki” QZSS satellites). Viewing ...
Fixed issues: - Fixed an issue that sometimes resulted in the image in the monitor being out of focus when the camera was turned on. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the ...
This package provides the necessary upgrade files of Nikon COOLPIX S6800 Camera Firmware version 1.1.  Fixes: - Occurrence of an issue that in some rare cases prevented proper recovery of the camera, even when it was turned off and then on again, when a lens error occurred has been reduced.About ...
Changes: - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. - The display would sometimes fail to follow changes to camera orientation (portrait to landscape or vice versa). - Interval timer photography would end after 1800 shots. - The camera would sometimes stop responding to controls other ...
Changes: - Fixed an issue that in rare cases would prevent the camera turning on even when a battery with sufficient charge was inserted. - Updated some help text. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the ...
Changes: - Setup Menu: The language that is set may not be displayed correctly. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The camera's A and B firmware versions will be displayed. - ...
Changes from “C” Firmware Version 1.00 to 1.10 - The camera can now record movies up to 29 minutes and 59 seconds long. Movies are recorded across up to 8 files, each up to 4 GB size, which can be joined together using the ViewNX-Movie Editor option in ViewNX-i version ...
Changes: - The D5 and D500 ISO sensitivity displays are now supported. If you are using two WR-1 units, one as a receiver and the other as a transmitter, update both to firmware version 1.01. - When used as a transmitter to change ISO sensitivity for a receiving camera, the ...
Changes: - Fixed an issue that occurred with WR-R10 wireless remote controller firmware version 3.00. In rare cases, the camera would fail to display the number of exposures remaining or would take about a minute to power down when the WR-R10 was connected. Viewing the Camera Firmware Version - ...
Changes: - Fixed an issue that sometimes caused the camera to stop responding when attached to a WR‑R10 wireless remote controller running firmware version 3.00. Updating the Camera Firmware: - Save and run the downloadable file to create a “D810Update” folder. - Using a card slot or card reader, copy ...

My Account

Advertise Link To Us Privacy Policy Contact Us