register at Windows8Downloads.com Windows 8 Downloads RSS add Windows 8 Downloads to favorites

Nikon D6 Camera Firmware 1.31 Windows 8 driver download - Windows 8 Downloads

Windows 8 driver

Nikon D6 Camera Firmware 1.31



Nikon D6 Camera Firmware 1.31 - Details

File Size: 53.50 MB
OS: Windows 8.1, Windows 8.1 64 bit, Windows 10, Windows 10 64 bit
Released: Jul 6, 2021
Downloads: Total: 28 | This Month: 28
Keywords: Nikon D6 Camera Firmware 1.31, download Nikon D6 Camera Firmware 1.31, Nikon D6 Camera Firmware 1.31 free download, Nikon D6 Camera Firmware, Nikon D6 Firmware, D6 Camera Firmware, Firmware, Nikon, Camera
Download Nikon D6 Camera Firmware 1.31

Nikon D6 Camera Firmware 1.31 driver for Windows 8 - Full description

Fixed the following issues:

- Waking the camera by pressing a control such as the AF-ON button after the standby timer had expired would in very rare instances cause camera settings to change or shooting would to start without the shutter-release button being pressed.
- The shutter release would in very rare instances stop responding after a burst of photographs in continuous release mode or after an uninterrupted series of photographs taken in quick succession in single-frame release mode.

Viewing the Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Save the downloadable file to the newly-created folder.
- Run the package to extract a .bin file (the camera firmware) to a folder named “D6Update”
- Using a card slot or card reader, copy .bin file to a memory card that has been formatted in the camera.
- Insert the memory card into the Slot 1 on the camera and turn the camera on.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.



Windows 8 Nikon D6 Camera Firmware 1.31 related drivers

Changes: - The camera would sometimes freeze when turned on under water. - The location data display for active mode showed seconds in base 10. - Improved the accuracy of location data in certain locations (specifically, those locations where location data are augmented by data from “Michibiki” QZSS satellites). Viewing ...
Fixed issues: - Fixed an issue that sometimes resulted in the image in the monitor being out of focus when the camera was turned on. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the ...
Changes: - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. - The display would sometimes fail to follow changes to camera orientation (portrait to landscape or vice versa). - Interval timer photography would end after 1800 shots. - The camera would sometimes stop responding to controls other ...
This package provides the necessary upgrade files of Nikon COOLPIX S6800 Camera Firmware version 1.1.  Fixes: - Occurrence of an issue that in some rare cases prevented proper recovery of the camera, even when it was turned off and then on again, when a lens error occurred has been reduced.About ...
Changes: - Setup Menu: The language that is set may not be displayed correctly. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The camera's A and B firmware versions will be displayed. - ...
Changes: - The D5 and D500 ISO sensitivity displays are now supported. If you are using two WR-1 units, one as a receiver and the other as a transmitter, update both to firmware version 1.01. - When used as a transmitter to change ISO sensitivity for a receiving camera, the ...
Changes: - Fixed an issue that sometimes resulted in incorrect exposure for the first photo taken in live view. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version. - ...
Changes from “C” Firmware Version 1.00 to 1.10 - The camera can now record movies up to 29 minutes and 59 seconds long. Movies are recorded across up to 8 files, each up to 4 GB size, which can be joined together using the ViewNX-Movie Editor option in ViewNX-i version ...
Changes: - Fixed an issue that sometimes caused the camera to stop responding when attached to a WR‑R10 wireless remote controller running firmware version 3.00. Updating the Camera Firmware: - Save and run the downloadable file to create a “D810Update” folder. - Using a card slot or card reader, copy ...
Changes: - Fixed an issue that occurred with WR-R10 wireless remote controller firmware version 3.00. In rare cases, the camera would fail to display the number of exposures remaining or would take about a minute to power down when the WR-R10 was connected. Viewing the Camera Firmware Version - ...

My Account

Advertise Link To Us Privacy Policy Contact Us