register at Windows8Downloads.com Windows 8 Downloads RSS add Windows 8 Downloads to favorites Windows 8 Downloads bookmark

Nikon D5500 Camera Firmware 1.02 Windows 8 driver download - Windows 8 Downloads

Windows 8 driver

Nikon D5500 Camera Firmware 1.02



Nikon D5500 Camera Firmware 1.02 - Details

File Size: 17.70 MB
OS: Windows Vista / Vista 64 bit / 7 / 7 64 bit / 8.1 / 8.1 64 bit / 10 / 10 64 bit
Released: May 9, 2017
Downloads: Total: 71 | This Month: 71
Keywords: Nikon D5500 Camera Firmware 1.02, download Nikon D5500 Camera Firmware 1.02, Nikon D5500 Camera Firmware 1.02 free download, Nikon D5500 Firmware, D5500 Camera Firmware, Nikon D5500 DSLR Camera Firmware, D5500, Firmware, Nikon, Camera
Download Nikon D5500 Camera Firmware 1.02

Nikon D5500 Camera Firmware 1.02 driver for Windows 8 - Full description

Changes:

- The camera would stop responding if the multi selector was pressed right with Add items > CUSTOM SETTING MENU > c Timers/AE lock selected in MY MENU.

- The shutter would sometimes not be released in response to live view touch shutter controls if autofocus was used with an SB-800 flash unit attached.

- Optimal exposure would sometimes not be achieved in photographs taken during live view with lenses that support both autofocus and electronic aperture control (type E lenses).

- If image review was enabled during viewfinder photography, the camera would sometimes display shooting information in place of the most recent picture when the user removed their eye from the viewfinder after shooting.

- The camera would sometimes fail to store the option selected for a Autofocus > a3 Built-in AF-assist illuminator in the CUSTOM SETTING MENU after the mode dial was rotated to another setting.

Note:

- Once this firmware is installed, the Windows edition of Camera Control Pro 2 versions 2.22.0 and earlier will no longer be able to detect the camera. Upgrade to homepage or later.

The following issues have been addressed:

- Noise would occur at four-second intervals in audio output to external recorders connected via HDMI in movie live view.

- Choosing negative values for Exposure compensation in the RETOUCH MENU > NEF (RAW) processing display did not have the desired effect.

- Selecting ON for Exposure smoothing during interval timer photography would result in all shots after the first being overexposed.

Viewing the Camera Firmware Version:

- Turn the camera on.

- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.

- Check the camera firmware version.

- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.

- Download the firmware file to the folder created.

- Run it to extract the firmware file.

- Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.

- Insert the memory card into the camera memory card slot and turn the camera on.

- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.

- Once the update is complete, turn the camera off and remove the memory card.

- Confirm that the firmware has been updated to the new version.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 2



Windows 8 Nikon D5500 Camera Firmware 1.02 related drivers

Fixed issues: - Fixed an issue that sometimes resulted in the image in the monitor being out of focus when the camera was turned on. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the ...
Changes: - The camera would sometimes freeze when turned on under water. - The location data display for active mode showed seconds in base 10. - Improved the accuracy of location data in certain locations (specifically, those locations where location data are augmented by data from “Michibiki” QZSS satellites). Viewing ...
This package provides the necessary upgrade files of Nikon COOLPIX S6800 Camera Firmware version 1.1.  Fixes: - Occurrence of an issue that in some rare cases prevented proper recovery of the camera, even when it was turned off and then on again, when a lens error occurred has been reduced.About ...
Changes: - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. - The display would sometimes fail to follow changes to camera orientation (portrait to landscape or vice versa). - Interval timer photography would end after 1800 shots. - The camera would sometimes stop responding to controls other ...
Changes: - Fixed an issue that in rare cases would prevent the camera turning on even when a battery with sufficient charge was inserted. - Updated some help text. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the ...
Changes: - Setup Menu: The language that is set may not be displayed correctly. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The camera's A and B firmware versions will be displayed. - ...
Changes from “C” Firmware Version 1.00 to 1.10 - The camera can now record movies up to 29 minutes and 59 seconds long. Movies are recorded across up to 8 files, each up to 4 GB size, which can be joined together using the ViewNX-Movie Editor option in ViewNX-i version ...
Changes: - Fixed an issue that sometimes caused the camera to stop responding when attached to a WR‑R10 wireless remote controller running firmware version 3.00. Updating the Camera Firmware: - Save and run the downloadable file to create a “D810Update” folder. - Using a card slot or card reader, copy ...
Changes: - Fixed an issue that occurred with WR-R10 wireless remote controller firmware version 3.00. In rare cases, the camera would fail to display the number of exposures remaining or would take about a minute to power down when the WR-R10 was connected. Viewing the Camera Firmware Version - ...
Changes: - The D5 and D500 ISO sensitivity displays are now supported. If you are using two WR-1 units, one as a receiver and the other as a transmitter, update both to firmware version 1.01. - When used as a transmitter to change ISO sensitivity for a receiving camera, the ...

My Account

Advertise Link To Us Privacy Policy Contact Us