register at Windows8Downloads.com Windows 8 Downloads RSS add Windows 8 Downloads to favorites Windows 8 Downloads bookmark

Nikon COOLPIX S9900 Camera Firmware 1.2 Windows 8 driver download - Windows 8 Downloads

Windows 8 driver

Nikon COOLPIX S9900 Camera Firmware 1.2



Nikon COOLPIX S9900 Camera Firmware 1.2 - Details

Download Nikon COOLPIX S9900 Camera Firmware 1.2

Nikon COOLPIX S9900 Camera Firmware 1.2 driver for Windows 8 - Full description

Fixes:

- In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable.
- The shutter-speed display would not flash in shutter-priority auto mode if optimal exposure could not be achieved because the subject was too bright.

How to verify your camera’s current firmware version:

- Turn on the camera.
- Press the MENU button to display the menu screen.
- Press the rotary multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.
- Highlight Firmware version from the setup menu and press the OK button.
- The camera's firmware version will be displayed.
- Turn off the camera.

Quick Install Guide:

- Power the camera from AC adapter unit or use a fully charged battery.
- Create a new folder with an appropriate name on your computer's hard drive.
- Download the file from the available links.
- Run the downloaded file to create a folder which contains the firmware folder.
- Use a card reader or similar device to copy the firmware folder to the root directory of a memory card formatted in the camera.
- Backup any data saved to the camera’s internal memory.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the update is complete, turn off the camera and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
- Format the camera’s internal memory by selecting Format memory from the setup menu, and then turn off the camera. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.



Windows 8 Nikon COOLPIX S9900 Camera Firmware 1.2 related drivers

Changes: - The camera would sometimes freeze when turned on under water. - The location data display for active mode showed seconds in base 10. - Improved the accuracy of location data in certain locations (specifically, those locations where location data are augmented by data from “Michibiki” QZSS satellites). Viewing ...
Fixed issues: - Fixed an issue that sometimes resulted in the image in the monitor being out of focus when the camera was turned on. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the ...
This package provides the necessary upgrade files of Nikon COOLPIX S6800 Camera Firmware version 1.1.  Fixes: - Occurrence of an issue that in some rare cases prevented proper recovery of the camera, even when it was turned off and then on again, when a lens error occurred has been reduced.About ...
Changes: - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. - The display would sometimes fail to follow changes to camera orientation (portrait to landscape or vice versa). - Interval timer photography would end after 1800 shots. - The camera would sometimes stop responding to controls other ...
Changes: - Fixed an issue that in rare cases would prevent the camera turning on even when a battery with sufficient charge was inserted. - Updated some help text. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the ...
Changes: - Setup Menu: The language that is set may not be displayed correctly. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The camera's A and B firmware versions will be displayed. - ...
Changes from “C” Firmware Version 1.00 to 1.10 - The camera can now record movies up to 29 minutes and 59 seconds long. Movies are recorded across up to 8 files, each up to 4 GB size, which can be joined together using the ViewNX-Movie Editor option in ViewNX-i version ...
Changes: - Fixed an issue that sometimes caused the camera to stop responding when attached to a WR‑R10 wireless remote controller running firmware version 3.00. Updating the Camera Firmware: - Save and run the downloadable file to create a “D810Update” folder. - Using a card slot or card reader, copy ...
Changes: - The D5 and D500 ISO sensitivity displays are now supported. If you are using two WR-1 units, one as a receiver and the other as a transmitter, update both to firmware version 1.01. - When used as a transmitter to change ISO sensitivity for a receiving camera, the ...
Changes: - Fixed an issue that occurred with WR-R10 wireless remote controller firmware version 3.00. In rare cases, the camera would fail to display the number of exposures remaining or would take about a minute to power down when the WR-R10 was connected. Viewing the Camera Firmware Version - ...

My Account

Advertise Link To Us Privacy Policy Contact Us