register at Windows8Downloads.com Windows 8 Downloads RSS add Windows 8 Downloads to favorites Windows 8 Downloads bookmark

MOTU UltraLite-mk3 Hybrid Audio Interface Firmware 1.07 Windows 8 driver download - Windows 8 Downloads

Windows 8 driver

MOTU UltraLite-mk3 Hybrid Audio Interface Firmware 1.07



MOTU UltraLite-mk3 Hybrid Audio Interface Firmware 1.07 - Details

Download MOTU UltraLite-mk3 Hybrid Audio Interface Firmware 1.07

MOTU UltraLite-mk3 Hybrid Audio Interface Firmware 1.07 driver for Windows 8 - Full description

Fixes:

- New firmware version for ULMK3HR (FW800 units)

Firmware Installation:

Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of the plug is aligned with the curved part of the port. Forcing the plug into the port the wrong way can permanently damage the interface.

- Turn off the device.

- Disconnect the FireWire (or ThunderBolt) cable from back panel if it is connected.

- Connect the device to the computer via USB.

- Press and hold the Page knob on the front panel and turn on the device.

- Release the Page knob when the bootloader version number appears on the LCD.

- Open the firmware updater program and follow the on-screen instructions to install the update.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer



Windows 8 MOTU UltraLite-mk3 Hybrid Audio Interface Firmware 1.07 related drivers

Fixes: - Added Windows USB3 compatibility - Fixed FireWire FIFO noise when connected to a MacMini Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of the plug is aligned with the curved ...
Fixes: - New firmware version for ULMK3HR (FW800 units) Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of the plug is aligned with the curved part of the port. Forcing the plug into ...
Fixes: - Improved S/PDIF output stability Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of the plug is aligned with the curved part of the port. Forcing the plug into the port the ...
Fixes: - Implemented Factory Reset via front panel - Fixed an issue where Analog to Optical routing would sometimes fail in Converter mode Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of ...
Fixes: - Fixed FireWire FIFO noise when connected to a MacMini - Enabled MIDI Thru feature - Added MIDI Thru control under SETUP menu - Added Windows USB3 compatibility Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make ...
Fixes: - Improves USB communication - Addresses an issue where the device will not get detected by the computer upon startup, if HP USB printer drivers are installed in the system. Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the ...
Fixes: - Stabilized audio specification on some UltraLite-mk3 Hybrid units with firmware v1.05 Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of the plug is aligned with the curved part of ...
Fixes: - Improved audio output stability - The new firmware updater app has a new icon and should fix a crash that would occur to the updater when power cycling the 828mk3 FW immediately after updating. Firmware Installation: Be aware of the orientation of the FireWire or USB ...
Fixes: - Fixed MIDI output issue at higher sample rates Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of the plug is aligned with the curved part of the port. Forcing the ...
Fixes: - Fixed FireWire FIFO noise when connected to a MacMini - Added Windows USB3 compatibility Firmware Installation: Be aware of the orientation of the FireWire or USB plug when connecting it to the device. Make sure that the curved part of the plug is aligned with the ...

My Account

Advertise Link To Us Privacy Policy Contact Us