SOFTWARE

LATEST DRIVERS

TOP DRIVERS

Change Points:

- This update is released to a fix rarely occurring Blue Screen of Death (BSOD).

Device Confirmation:

- Open Device Manager, then click Disk drives.
- If Samsung MSMTE128HMGR-00000 is listed, then proceed to installation.
- If Samsung MSMTE128HMGR-00000 is not listed, then this Firmware Update is not for your computer.

Installation Instructions:

- Download and save this file to a convenient location such as the Windows Desktop.
- Save all work in progress and close open applications.
- From the Windows Desktop, double-click the downloaded file to start extraction of the firmware files.
- If a User Account Control or Open File message is displayed, press Yes.
- Click OK.
- Click Unzip to start file extraction.
- From the C:DiagOS2015035AWindows_Update folder, right-click on ToshibaFWUpdater, then select Run as administrator.
- Click Yes if a User Account Control message is displayed.
- Click Yes after reading the warning message.
- Click OK after the firmware update is completed.
- Restart the computer.

Notes:

- If the update has already been installed, Your SSD already has the latest firmware will be displayed.
- If the drive in your computer is not the intended Samsung MSMTE128HMGR SSD, Firmware update is not available for this storage will be displayed.

This package contains the files needed for installing the Samsung SSD firmware. If your computer is currently running an older version of this firmware, updating may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible, we do not recommend applying this release on platforms other than the ones specified.

To install this package please do the following:

- Click the Download button and follow the steps for saving the package on your computer.
- Save all work in progress and close open applications.
- Note for .ZIP archives: Extract the file and enter the newly-created directory.
- Locate and run the available setup file.
- Allow Windows to run the file (if necessary).
- Read and agree with the License Agreement to proceed with the installation process.
- Follow the instructions displayed on-screen.
- Close the wizard and perform a system reboot to allow changes to take effect.

About SSD Firmware:

Changing the solid-state drive (SSD) firmware version can bring about a wide variety of changes such as stability improvements for different sleep states, power consumption enhancements, increased read/write speeds, optimized compatibility with various systems, and many others.

However, performing this step is very risky because it can damage the SSD's software in the event of an update failure. Therefore, make sure you consider changing the firmware only when and if the new version includes changes that you can make use of.

As for the installation method, given the huge number of SSD manufacturers and the wide variety of solid-state drives, it's recommended that you carefully read and understand the update guide, and initiate the upgrade only when you have completely familiarized yourself with the steps.

In addition to that, most SSD manufacturers also require additional software that will help you apply a new firmware using a specific method – so make sure you have everything you need for a complete and successful upgrade.

Another aspect you should keep in mind is that this task must be performed in a steady power environment, such as the one provided by a UPS unit. Don't forget to reboot the system so that the newly made changes can take effect.

That being said, if this release includes the changes you need / desire, click the download button and get the firmware file. If not, check with our website constantly in order to find out first when a suitable update becomes available.